-
- Vendor:
Retro Gold
-
- Vendor:
Run Stop Re-Store
- Limited Warranty:
1 Year
-
- Vendor:
Arcadia by Eye-Box
-
- Vendor:
anotherworld
-
- Vendor:
Arcadia by Eye-Box
-
- Vendor:
Run Stop Re-Store
- Limited Warranty:
1 Year
-
- Vendor:
Run Stop Re-Store
- Limited Warranty:
1 Year
-
- Vendor:
Run Stop Re-Store
- Limited Warranty:
1 Year
Run Stop Re-Store
- Utrechtseweg 47H, Utrecht, Netherlands
- info@runstoprestore.nl
- Run Stop Re-Store
- 82010056
- NL003628252B79
- KNAB
- NL56KNAB0617736316
-
New and original power switch for Commodore 64, 128 wedge, CD32 and 1541-II & 1581 diskdrives
All new and original spare part. Produced in 2023. Fits the Commodore 64, 128 wedge model, Amiga CD32 and the 1541-II & 1581 diskdrives as a drop in replacement.
Price listed includes applicable VAT rate
€5,25 -
PCB Connector kit for the Commodore 64
Full PCB connector kit for Commodore 64 (All revisions)
€27,95 -
Price range: €20,00 through €22,00

4164 RAM Kit for C64 / ZX Spectrum / Atari / Amstrad CPC (8*4164) (New old stock)
Price range: €20,00 through €22,00 -
NeatPLA for the Commodore 64
The best looking PLA replacement chip there is. Designed by Pasi Lassila and the chips in this shop were built by the designer himself.
Compatible with all longboard revisions and all cartridge types (Zaxxon,Epyx Fastload etc)
Lower power requirements and does not run hot.
Gold plated round pins for easy placement into any type of socket.
€22,95NeatPLA for the Commodore 64
€22,95 -
Price range: €34,95 through €36,95

Sharp 252535-01 “Super” PLA for the Commodore 64C (New Old Stock)
Price range: €34,95 through €36,95 -
MOS/CSG 901226-01 Basic ROM for the Commodore 64 (New Old Stock)
Basic ROM for all the Commodore 64 longboard revisions. Chip is New Old Stock.
€19,95 -
CSG 251913-01 Basic+Kernal ROM for the Commodore 64C (New Old Stock)
Combined Basic and Kernal ROM for the Commodore 64 (shortboard) and 128
€14,95 -
MOS 6561-101 PAL VIC video/audio chip for the Commodore VIC20 (New Old Stock)
Brand new and unused MOS6561-101 Video + Audio chip for the VIC20. Chip tested before shipping.
Datecode may vary from pictured.
Price includes EU Tax
€34,95 -
C64 Modulator replacement (c0pperdragon)
Replacement for the original RF modulator. Creates the output video signals needed to use the video out DIN connector of the C64 mainboard. Increased signal quality over the original by removal of obsolete components and less susceptible to interference. Â Board design by “c0pperdragon”. Â Fully manufactured PCB with components assembled at the factory. Ships with sets of male and female round pin headers for direct to board mounting, or make it removable. Comes with a full year warranty.
Price listed includes applicable VAT rate
€15,95 Buy 5 to get 10% discountC64 Modulator replacement (c0pperdragon)
€15,95 Buy 5 to get 10% discount -
MOS 901486-01 Basic ROM for the Commodore VIC20 (New Old Stock)
Basic ROM for the Commodore VIC 20, New Old Stock or High Quality pulls
Price includes EU Tax
€19,95 -
Price range: €7,00 through €9,00
64K RAM Kit for C64C, Atari, MSX (2*81464/4464)
Price range: €7,00 through €9,00 -
EVO64 Assembly and test service
Have your EVO64 professionally build and tested! Service includes mounting of all through hole components, cleaning and full diagnostic harness testing. Please read the extended description below.
Price listed includes applicable VAT rate
€99,00 -
FREE PDF COPY OF FREEZE64 ISSUE #59
This PDF is for promotional purposes only and not part of the regular FREEZE64 service. FREEZE64 is predominantly a physical, printed A5 ‘zine, and this PDF has been released to highlight the information and features it provides for the Commodore 64 scene. If you would like further printed issues of FREEZE64, then please treat yourself to one of their limited back-issues, which you can grab from http://www.FREEZE64.com/issues Better still, you can purchase a subscription from http://www.FREEZE64.com/subscribe and automatically receive new issues as and when they are released.
-
NeatESD control port protection for C64
NeatESD control port ESD protection for the Commodore 64. Prevent static discharges when swapping joysticks from damaging your CIA chips. Set of two mini PCBs with ESD protection diodes preinstalled.
€6,50 -
MOS906114-01 PLA for the Commodore 64 (New Old Stock)
MOS 906114-01 PLA chip for all Commodore 64 longboard revisions. New Old Stock, never been used except to test. Full tests have been done to ensure proper operation under load.
Price includes EU Tax
€14,95 -
MOS 6502 CPU for the Commodore PET/VIC20/15xx (New Old Stock)
New Old Stock MOS6502 CPU for use in PET, VIC20 and different 15xx series floppydrives.
EU Tax included.
€14,00 -
MOS6532 Ram IO Timer (RIOT)
MOS6532 RAM IO Timer. Used in many different vendor products such as the PET floppy drives, Atari 2600 and others.
Chips are pulls, but in excellent condition, pins cleaned and fully tested.
Price includes EU Tax
€14,95MOS6532 Ram IO Timer (RIOT)
€14,95 -
MOS901229-05 DOS Hi-Rom for the 1541 (New Old Stock)
MOS901229-05 DOS Hi-ROM for the 1541 Floppy Drive. New Old Stock and fully tested.
Price includes EU Tax
€14,95 -
Commodore 1541-II Controller PCB (New Old Stock)
Brand new controller PCB for the Commodore 1541-II diskdrives. Complete with all chips populated and fully tested.
(PCB color might vary slightly, led assembly might be already detached from main pcb.)
Price includes EU Tax
€39,95€49,95Commodore 1541-II Controller PCB (New Old Stock)
€39,95€49,95 -
MOS310654-03 DOS/Kernal for 1571 (New Old Stock)
New Old Stock ROM with the 310654-3 version of the DOS/Kernal for the 1571.
Date codes may vary.
Price includes EU Tax
€5,00 -
MOS325572-01 Gate Array for the 1541 (New Old Stock)
New Old Stock MOS325572-01 Gate Array for the Commodore 1541 series drives (not for 1541-II !)
Price includes EU Tax
€12,50

























